|
GT Mfg., Inc. is proud to offer an economical
and efficient piece of equipment designed to help you tackle your
floor/ground maintenance jobs. The rugged and compact MasterSweep
automatically turns your forklift into a powerful floor sweeper in only
minutes. Just attach it to your forklift and you're ready to
clean.
Engine
13 HP Vertical shaft,
twin cylinder-air cooled-LP or Gasoline engine. Electric start on gasoline
models, 12 volt battery.
Frame
Unitized construction
featuring rectangular steel tubing. Cantilever design with integral
hydraulic reservoir/radiator. Reinforced at stress points.
Drives
Main broom, side brush, air
induction and hopper dump are hydraulically operated.
Sweep Path
48 in. sweep path
including side brush. (Model 48)
60 in. sweep path including side
brush. (Model 60)
Sweeping Coverage
92,000 square
feet per hour based on a 48 in. wide path at 5 MPH with 6 in. overlap.
(Model 48)
118,800 square feet per hour based on a 60 in. wide path at
5 MPH with 6 in. overlap. (Model 60)
Sweeping Brushes
Main Broom: 36 in.
(Model 48) 48 in. (Model 60) cylindrical. One piece composite
core-disposable. Runs at constant RPM. Adjustable for pressure and wear.
Side Brush: 20 in. dia., rotary, one piece disposable. Quick change via
taper lock hub. Adjustable for angle, pressure and wear.
Dust Control System Fully enclosed, quick
change panel filter. 4 square feet of filtering area. High volume air
inducer provides constant air flow. Filtered air for clean
operation.
Debris Hopper
5 cu. ft. (Model 48)
6.2 cu. ft. (Model 60). Low dump or multi-level high dump up to 96
in.
Instruments
Tachometer, hourmeter,
hydraulic level and temperature. Standard low engine oil, high engine
temperature indicator lights or engine shut down available.
Controls
Operator controls all
functions of sweeping and debris disposal while seated.
Wheels
6 in. Shock absorbing Swivel
casters.
Weight
1,300lbs. (Model 48) 1400
lbs. (Model 60)
Dimensions
55 in. Wide x 68 in.
Long x 43 in. High. (Model 48)
67 in. Wide x 68 in. Long x 43 in. High.
(Model 60)
Forklift Hook-up
After forks are
removed, - MasterSweep is securely mounted via mast hooks. Controls are
mounted by magnets to the fork lift for easy operation by the operator.
Complete attach/detach operation in 5 minutes or less. Mounting clamps
adjustable, 13 in. to 24 in. spread.
| 
